1、What is the Dosage of Mineral

Drip irrigation and flushing, each dosage per mu: 200g-400g/mu in the seedling stage of leafy vegetables and 500g-800g/mu in the seedling stage (the dosage of tomato crops can be appropriately increased) with an interval of 7-15 days.

2、How to reasonably apply potassium fulvic acid for soil compaction plots

Mineral humic acid flushing fertilizer is suitable for flushing, with a dosage of about 300 to 500 grams per mu, and can reduce the dosage of large chemical fertilizers by 20% to 30%.

3、Biochemical potassium fulvic acid

Biochemical potassium fulvic acid can be used as base fertilizer, acupoint fertilizer, flushing application, the amount of 100 pounds per mu. Biochemical potassium fulvic acid can be sprayed with drip irrigation, the amount of 10 kg per mu.

4、How to Formulate Liquid Fertilizers with Potassium Fulvate: A Complete

Formulating liquid fertilizers with potassium fulvate? Learn about raw material selection, compatibility, mixing order, pH control, and stability tips to develop a high-performance product.

How to use mineral

Drip irrigation and flushing, each dosage per mu: leafy vegetables 200g-400g/mu at the seedling stage, 500g-800g/mu at the seedling stage (the dosage can be increased appropriately for tomato crops), the interval between each use is 7-15 days.

Foliar Spray and Irrigation High Fulvic Acid K2o 100% Soluble Potassium

Property: Potassium Fulvate is extracted from humic acid. With excellent water solubility and high loading capacity and physiology activity. It is applied in landscape and garden as well as for all agricultural and horticultural plants

China Potassium Fulvic Acid Factory

Fruit tree drip irrigation and irrigation, 2-4kg per mu per time, 3-5kg base application with conventional fertilizer, 10-15 days after each use, adjust the amount according to the size of the fruit tree.

Potassium K

To use Potassium K-Fulvate Acid As Foliar Spray Fertilizer, mix the recommended amount with water and apply directly to the leaves and stems of your plants. It is important to follow the manufacturer’s instructions carefully to avoid over-application or under-application.

Potassium Fulvate

Scientific research has shown that the fulvic acids in K-fulvate boost the response time by plants to fertiliser applications. This is very important in correcting any nutrient deficiencies in plants during growth, especially where deficiencies in nitrogen or trace elements are concerned.

Liquid Potassium Fulvate (50% Fulvic Acid)

Liquid Potassium Fulvate (50% Fulvic Acid) - High Concentration Soluble Humic Acid for Foliar Spray & Drip Irrigation

Potassium fulvic acid is an organic fertilizer primarily used to enhance soil fertility, improve soil structure, and promote crop growth. When applying potassium fulvic acid, the dosage should be determined based on soil conditions and crop requirements. Below are some recommendations for the spray dosage per mu:

1. Understand Soil Conditions: Before using potassium fulvic acid, assess factors such as soil fertility, pH value, and organic matter content. This helps determine the appropriate dosage to ensure optimal results.

2. Follow Recommended Dosages: Dosage requirements may vary by region and crop type. Refer to agricultural technical guidelines or advice from professional organizations to establish suitable application rates.

3. Monitor Crop Growth: After application, closely observe crop growth. If poor growth or other issues arise, adjust the dosage or take additional measures as needed.

4. Control Dosage: Avoid excessive use to prevent waste. Generally, the recommended dosage is 1–3 kilograms per mu. Adjust specific amounts based on actual conditions.

5. Ensure Uniform Application: Apply the fertilizer evenly across the soil surface to maximize effectiveness. Use a sprayer or dissolve the fertilizer in water before application.

6. Avoid Overuse: While potassium fulvic acid is an organic fertilizer, it contains nitrogen, phosphorus, and potassium. Excessive use may disrupt soil nutrient balance and harm crops. Always control dosage to prevent overapplication.

7. Combine with Other Fertilizers: Enhance fertilizer efficiency by mixing potassium fulvic acid with compound fertilizers or bio-bacterial fertilizers.

8. Prioritize Safety: Wear personal protective equipment to avoid skin or eye contact. Comply with local environmental regulations to minimize ecological impact.

determine the dosage per mu based on soil conditions and crop needs. Observe crop responses, control usage, and prioritize safety and environmental protection. These guidelines aim to assist you in optimizing results.